User Tools

Site Tools


layer:analog_clock

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

layer:analog_clock [2013/08/08 17:42] (current)
david created
Line 1: Line 1:
 +====== Analog Clock Layer ======
  
 +This layer displays an analog-style clock. It can use an image or simple circle for a background, or be just hands.
 +
 +{{:​layer:​layer-analogclock-parameters.png?​nolink |}}
 +
 +^ Group ^ Parameter ^ Function ^
 +| Control | Clock Offset Hour   | The clock will display the time that your computer has, but you can manually offset the time displayed. This may be useful when dealing with different time zones. |
 +| :::     | Clock Offset Minute | ::: |
 +| Appearance | Hands Color      | Pick the color and opacity for the clock hands. |
 +| :::        | Hour Marks Color | Pick the color and opacity for the hour marks. |
 +| :::        | Background ​      | Choose ''​None''​ to show only hands, ''​Circle''​ to show a simple circle shape behind the hands, or ''​Image''​ to use an image for the background. |
 +| :::        | Image            | If Image is selected above, this is the image source to use as the clock'​s background. Transparency is supported. If the image already has tick marks on it you can turn the Hour Marks Color above to 0% opacity. |
 +| :::        | Image Scale      | Change the scale of the background image if needed. It is best to design the image with the document dimensions in mind since extreme scaling may result in artifacts. |
 +| :::        | Color            | If Color is selected above, set the color and opacity of the circle background. |
 +| :::        | Circle Scale     | Set the size of the circle background. |
 +| Geometry | Center Anchor | Specify the general position of your clock. It can be anchored to one of nine points, and further adjusted using the inset parameters. |
 +| :::      | X Inset  | Horizontal and vertical inset of the clock from the anchor point. |
 +| :::      | Y Inset  | ::: |
 +| :::      | Diameter | Adjust the overall size of the clock. |
 +| Transition | Incoming | You can setup how the clock should appear when switched to live. Choose from: ''​Cut''​ (show immediately),​ ''​Dissolve''​ (fade in), or ''​Push''​ from any direction. |
 +| :::        | Outgoing | You can set the layer to exit in the same manner as it appeared, or choose a different setting. |
 +| :::        | Duration | If you choose another transition other than ''​Cut''​ you can specify the duration of the transition. |
layer/analog_clock.txt · Last modified: 2013/08/08 17:42 by david