User Tools

Site Tools


showing_sponsor_logos_in_an_endless_loop

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
showing_sponsor_logos_in_an_endless_loop [2013/04/08 01:23]
achim repleace keyboadr shortcut display
showing_sponsor_logos_in_an_endless_loop [2013/06/08 17:40] (current)
david clarifications
Line 4: Line 4:
  
   - Add a single **Boinx Software Credit** layer to the top of your layer stack.   - Add a single **Boinx Software Credit** layer to the top of your layer stack.
-  - Setup the **Toggle Key** in the left parameter view to a keyboard short cut of your choice (e.g. ⌥1) +  - Setup the **Layer Toggle Key** in the left parameter view to a keyboard short cut of your choice(e.g. ⌥1) 
-  - Switch the Image Type parameter ​from **White on Black** ​to **Custom Image**. A new image input will appear below. +  - Switch the Image Type parameter to **Custom Image**. A new image input will appear below. 
-  - Put your first Sponsor-logo in those **Custom Image** input +  - Put your first sponsor ​logo in this **Custom Image** input. 
-  - Setup the **Show Duration** and **Pause Duration** ​parameter to the followingPause Duration ​Show Duration ​x (Sponsor Logo count - 1) (e.g. 40secs = 10secs x (5 Logos - 1) +  - Set your desired ​**Show Duration**and set **Pause Duration** ​as follows''​PauseDuration ​ShowDuration ​x (SponsorLogoCount ​- 1)'' ​e.g. 40secs = 10secs x (5 Logos - 1) 
-  - Adjust the position in the **Geometry** section, ​and the Transition ​type as you like. +  - Adjust the Geometry and Transition ​parameters ​as you like. 
-  - Duplicate this layer by clicking on the gear button on the top of the layer stack(those must be separate layers, not layer settings!)+  - Duplicate this layer by clicking on the gear button on the top of the layer stack or **⌘D** ​(They must be separate layers, not layer settings!)
   - Exchange the **Custom Image** with the next sponsor logo.   - Exchange the **Custom Image** with the next sponsor logo.
-  - Repeat steps 7+8 until you have all your sponsor logos set up in separate ​layer+  - Repeat steps 7+8 until you have all your sponsor logos set up in separate ​layers
-  - Setup the **First Start Delay** of each layer to be delayed more by the "Show Duration" ​parameter for each layer (e.g. first layer ''​0'',​ next layer ''​10'',​ second layer ''​20''​ and so on). +  - Set the **First Start Delay** of each layer in increments of the "Show Duration" ​value. ​(e.g. first layer ''​0'',​ next layer ''​10'',​ second layer ''​20''​ and so on). 
-  - Make sure all your sponsor layers are switch ​off. Now hit the keyboard command (in this tutorial ⌥1) and all the layers should go live.+  - Make sure all your sponsor layers are switched ​off. Now hit the keyboard command (in this tutorial ⌥1) and all the layers should go live and constantly cycle logos.
  
 {{ :​sponsorloop.png?​direct&​400 |}} {{ :​sponsorloop.png?​direct&​400 |}}
showing_sponsor_logos_in_an_endless_loop.txt · Last modified: 2013/06/08 17:40 by david